Load data for .44 Auto Mag. + .430 | 300gr | CutEdge HG

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.430 \| 300gr \| CutEdge HG
Manufacturer SKU:	HG Maximus
Bullet Weight:	300gr \| 19.4g
Bullet Diameter:	0.000" \| 0.00mm
Bullet Length:	<<locked>>
Caliber:	.44 Auto Mag. load data
Case Length (l3):	1.298" \| 33.0mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	39.0 Grains of Water \| 2.53 cm³
Primer Size:	Large Pistol Magnum (LPM)
Max. allowed Pressure:	36985 psi \| 2550 bar
LID:	LID_B8609_C710
Last updated:	2026-03-24

Load data for 42 loads in caliber .44 Auto Mag. with .430 | 300gr | CutEdge HG bullet and 21 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	70%	33185	90%	**34	100%
Accurate 4100	<<locked>>	70%	32808	89%	**12	92%
[Accurate No. 11 FS]*	<<locked>>	79%	32576	88%	**19	85%
Alliant 2400	<<locked>>	66%	32430	88%	**06	94%
Alliant BLUE DOT	<<locked>>	70%	33098	90%	**96	99%
Alliant Herco	<<locked>>	68%	32518	88%	**48	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	71%	32895	89%	**63	100%
[Hodgdon H110]*	<<locked>>	74%	32460	88%	**35	89%
Hodgdon LilGun	<<locked>>	76%	33141	90%	**85	96%
Hodgdon TrailBoss	<<locked>>	97%	25338	68%	**8	100%
Ramshot Enforcer	<<locked>>	68%	33185	90%	**32	96%
ReloadSwiss RS 14	<<locked>>	96%	24294	66%	**2	100%
ReloadSwiss RS 30	<<locked>>	91%	33170	90%	**78	93%
SNPE Vectan BA6 1/2	<<locked>>	92%	32474	88%	**12	97%
SNPE Vectan BA7 1/2	<<locked>>	63%	32445	88%	**81	100%
[Somchem S265]*	<<locked>>	82%	32590	88%	**89	88%
Vihtavuori 3N38	<<locked>>	65%	32401	88%	**57	100%
Vihtavuori N105	<<locked>>	69%	32343	87%	**70	100%
Vihtavuori N110	<<locked>>	84%	33054	89%	**35	95%
Vihtavuori N32C Tin Star	<<locked>>	75%	32996	89%	**04	100%
[Winchester 296]*	<<locked>>	74%	32430	88%	**48	85%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26107	71%	**29	100%
[Accurate 4100]*	<<locked>>	61%	23859	65%	**55	86%
[Accurate No. 11 FS]*	<<locked>>	72%	25817	70%	**07	80%
Alliant 2400	<<locked>>	61%	26992	73%	**17	91%
Alliant BLUE DOT	<<locked>>	61%	25875	70%	**75	97%
Alliant Herco	<<locked>>	61%	27224	74%	**79	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	61%	25454	69%	**1	100%
[Hodgdon H110]*	<<locked>>	62%	21393	58%	**29	80%
[Hodgdon LilGun]*	<<locked>>	61%	18956	51%	**09	85%
Hodgdon TrailBoss	<<locked>>	79%	18811	51%	**0	100%
Ramshot Enforcer	<<locked>>	61%	26223	71%	**11	92%
ReloadSwiss RS 14	<<locked>>	76%	17318	47%	**0	100%
[ReloadSwiss RS 30]*	<<locked>>	74%	19972	54%	**09	81%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	13503	37%	**2	81%
SNPE Vectan BA7 1/2	<<locked>>	61%	30284	82%	**48	100%
[Somchem S265]*	<<locked>>	69%	22350	60%	**09	80%
Vihtavuori 3N38	<<locked>>	61%	28224	76%	**94	100%
Vihtavuori N105	<<locked>>	61%	25092	68%	**65	100%
[Vihtavuori N110]*	<<locked>>	61%	15737	43%	**7	81%
Vihtavuori N32C Tin Star	<<locked>>	61%	24468	66%	**9	100%
[Winchester 296]*	<<locked>>	68%	25846	70%	**30	80%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data